The software comes on a mini CD in the device package or can be downloaded from the transcend website.
Follow the following steps to install the software on your linux box:
1. Make sure that you have installed wine on your system. Please refer to your distro documentation to find out how to do this. For OpenSuse
>zypper install wine
executed as root will do the trick. Personally I do use the latest wine from cvs (version 1.1.3) provided by the OpenSuse build service on a daily basis.
2. Unzip the TsiSetup.zip archive
>cd path/to/downloaded/file >unzip TsiSetup.zip
3. Install the software
> wine DataLog.exe
4. Prepare wine for the new serial device
Connect the I-Blue 747 to a USB port using the provided USB mini cable. If you use a recent distro the device will be automatically detected, the appropriate kernel module (cp2101) will be loaded and a new serial device be created (/dev/ttyUSB0):
hub 2-0:1.0: unable to enumerate USB device on port 4
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=10c4, idProduct=ea60
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: CP2102 USB to UART Bridge Controller
usb 3-2: Manufacturer: Silicon Labs
usb 3-2: SerialNumber: 0001
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for cp2101
cp2101 3-2:1.0: cp2101 converter detected
usb 3-2: reset full speed USB device using uhci_hcd and address 2
usb 3-2: cp2101 converter now attached to ttyUSB0
usbcore: registered new interface driver cp2101
drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
Your wine setup is not aware of the new serial device, as the four serial ports com1 to com4 are connected to /dev/ttyS0 to /dev/ttyS3. You will have to remove one of the existing links and add a new one pointing to /dev/ttyUSB0:
>cd ~/.wine/dosdevices >rm -rf com2 >ln -s /dev/ttyUSB0 com2
Use one of the com ports don't matter which one. Pick one you don't use for anything else...
5. Start the application
Switch the device switch to the log position. And then start the datalogger application:
wine ~/.wine/drive_c/Program\ Files/LogTool/DataLog/DataLog.exe
You will be presented with a "Configuration" tab in which you will have to choose the com port you connected the /dev/ttyUSB0 to from the drop down list:
In my example that would be "com2". Click the "Connect" button to let the software talk to the device:
Under the menu entries on the left you can setup the device. You can specify GPS data to be stored, data formats, Save intervals and methods, and the like.
Under the "Satellite Information" tab you will be able to access the current inforamtion the device is currently pulling from the connected satellites:
As nice as all this is, the application under wine has one rather significant drawback. You can not get to your stored GPS data. Whenever I try to access any data on the device using the datalogger under wine, I miserably failed. The download window pops up and stays there until I kill the whole application using xkill. There was a report on how to use the applcaiton udner wine which is no longer available.
So if anybody is using the datalogger app under wine successfully. I would be happy to receive some pointers on what step you took to make this work.